Friendly people...expert advice.
(716) 677 - 4100
Swimming pool heaters will occassionally need service to get them up and running, especially after the long winter months when corrossion can damage the electrical connectors, mice can chew wires and leave nests, and spider webs can plug up the pilot and orfices.
At Pools Unlimited, our service techs can get your heater up and running. We service Hayward, Pentair, Raypak, Rheem, Teledyne, and Jandy swimming pool heaters in the following areas: Orchard Park, West Seneca, Lancaster, Cheektowaga, Elma, East Aurora, Blasdell, Hamburg and other commuities in the Buffalo area.
In the event your heater is beyond repair, we can recommend and install a new heater from any of the above listed manufacturers.
Many times when a heater won't start, the issue is simple - a dirty filter, the on/off switch not on, or the thermostat not turned up.
Heaters have safety switches in them which will not activate and allow the heater to turn on if there is not adequate water flow - so be sure to backwash or clean your filter thoroughly and make sure your skimmer and pump baskets are free of debris. (This is a common problem in the spring season when a pool is first opened or after an algae bloom).
Also, be sure to make sure the on/off switch is in the on position and the thermostat is turned up higher than the current water temperature.
After checking these things, try to restart the heater. Many times it will fire right up. If not, call us at 716 - 677 - 0459 or fill out the service form below to set up a service call.
|Our Products||Our Services||Our Company||Copyright 2014-2017|
|Aboveground Pools / Products||Aboveground Pool Service||About Us.|
|Inground Pools / Products||Inground Pool Service||Contact Us.|
|Hot Tubs/Spas / Products||Hot Tub/Spa Service||News|
|Grills / Products||Propane Filling Station|
Please Note: Product specifications may be changed by the manufacturers from time to time and may not be updated on this web site immediately.